We set the quarter in place after applying the 8115 Panel Bond adhesive and used self tapping screws to secure it. The we allowed the panel bond to dry. Panel bond is an adhesive that work well for installing panels. However, there are still locations on most panels where I would prefer to weld. I […]
About Donnie
Ceramic Clear Coat – How To Spray Waterborne Base and Ceramic Clear Coat
Waterborne Base Coat – In this video I am demonstrating how to apply Envirobase waterborne base coat by PPG. As explained in the video, the difference spraying techniques include: 75% overlap, drying, and using a control coat. This can be applied much faster than solvent. Once the base coat has dried to a matte allowing […]
How To Remove Rusted Bolts Using the Mini Ductor 2
The mini ductor 2 quickly removes rusted bolts. This tool is much quicker and safer than using a torch
How To Use Panel Bond Adhesive to Install a Quarter Panel on a 66 Ford Mustang
We are using panel bond adhesive to install the right quarter panel onto the 66 Ford Mustang. Finally, it seams like it took forever to get to this stage. The only bad thing is that now we have the other quarter panel to cut off and install. Hopefully we do not run into as much […]
Spray Gun Overlap For Applying Paint Coatings
Correct spray overlap is one o the easier techniques to master, but if not done properly, it can lead to several problems. I have found the combination of distance and speed to be the most difficult challenge when learning to spray. However, if you do not overlap each pass the recommended amount, you may not […]