DIY How To Replace A Rear Tail Light Bulb On A 2009 Pontiac G6 and Save $40

CollisionBlast.com – DIY How To Replace A Rear Tail Light Bulb On A 2009 Pontiac G6 and Save $40. – Hello Donnie Smith here, in today’s video I am going to show you how to replace a rear tail light bulb. This will save you $40 when replacing a bulb on a 2009 Pontiac G6. The part only costs two dollars and only takes 5 min. to install. The first thing you want to do is remove the cargo net. There is an upper and lower attachment where it is attached. Simply pull the cargo net over the knob to remove. Then unscrew by hand the knobs that the cargo net was attached to you. Once those two knobs, the upper and lower, are removed you can pull back the truck interior carpet piece that covers the taillight. Next, once you have that interior carpet pulled back, it is not necessary to remove the complete interior just pull it back far enough to gain access to the two bolts underneath. Once this is done using a 10 mm wrench or a simple crescent wrench removed the two bolts holding the tail light in. Now removed the taillight assembly which will pull out from the car body. Next twist the tail light bulb connection to removed from the taillight housing. Then simply pull the bulb out of the socket. The part number will be labeled on the bulb itself. I believe this bulb was a 1157. You should be able to get one of these from any parts store. If in question, take the bulb with you to show the parts salesperson. After you get the new bulb pushed back into the socket. A test can be done at …